1. <strike id="tspq2"></strike>
        <th id="tspq2"><video id="tspq2"></video></th>
          1. <code id="tspq2"></code>
            News
            Adsorption dryer knowledge
            Adsorption dryer knowledge
            First understanding the scope of adsorption dryer. The adsorption type dryer is used for pressure dew point in zero (0 ℃) the following occasions.It can reach the effect that the Refrigerated Corperssed Air Dryer is far from the drying effect.
            The second is the priciple of operation heatless regenerative dryer is through the "pressure" to the achieve the drying effect. Because the air containing moisture capacity and pressure is inversely proportional . The drying part of dry air (called again angry) decompression expan to atmospheric pressure, the pressure change is the expansion of the air,and it will become more dry, and then let it flow to regenerate the desiccant layer is not switched on airflow required (drying tower has to absorb enough water vapor), dry regeneraton suck the desiccant in the water,it will take them out to achieve dehumidification dryer for drying purposes. Heatless regenerative adsorption dryer consumes about 15% of the regeneration compressed air.
            Finally there is a principle of heat regeneration dryer. A heat regenerative adsorption dryer is through the "temperature" to achieve the drying effect. Because the air containing moisture capacity is proportional to temperature.

            Internal heating type adsorption dryer is made a small amount of dry air(called again angry) through the need to regenerate the desiccant and start the built-in heater machine cylinder, the high temperature air will suck the desiccant in the water, to be brought out of dryer.
            External heating type adsorption dryer is a let a small amount of dry air(called again angry) through the external heater then blows tore generate the desiccant layer, the high temperature dry air will suck the desiccant in the water, to be brought out of dryer.
            External heating type adsorption dryer is another common air through blower through external heater in the barrel; the high temperature air can be sucked out the desiccant in the water, to be brought out of dryer. The external heating type adsorption dryer is without consumption of compressed air, namely the regeneration of consumption is 0%.
            久久精品国产只有精品-色综合 亚洲 自拍 欧洲-AV片-免费AV在线观看